FULL DESCRIPTION
Ultimate Amp Design
Delivering incredibly tight, crisp and natural sound, the KM1700 power amp features a revolutionary accelerated transient response with rail tracking. Transient response is where the woofer cone matches bass tones and reacting accordingly to create sounds with maximum clarity. The rail tracking technology modulates the power supply rails with the peaks of the input signal for an efficient performance.
Simple Operation
The front panel of the KM1700 is home to the critical controls of the power amp such as the power button and the power LED indicator to show when the device is active. Each channel features gain controls with signal LEDs and clip LEDs, both showing when a signal is connected and when the input level needs to be reduced. The rear panel features the XLR, 1/4'' TRS and unbalanced 1/4'' TS connections for flexible compatibility. To connect speakers, users can choose between professional locking speaker outputs (SpeakOn) or the touch-proof binding posts. The rear panel also contains switches for mono, stereo and mono bridge mode as well as the limiter on/off switch which activates the integrated overload protection component.
FEATURES

• 2 x 800-watts into 4 Ω; 2 x 500-watts into 8Ω; 1700-watts into 8Ω; (bridge mode)
• Accelerated transient response technology Switchable limiters offer maximum output level with reliable overload protection
• Precise power, signal & clip LEDs
• XLR & 1/4'' TRS input connectors
• Professional speaker connectors & 'touch-proof' binding posts support variety of speaker wiring systems
• Independent DC & short circuit protection on each channel
• High-current toroidal transformer
• 'Front-to-back' ventilation
• Impact resistant housing & all-steel 2U rackmount chassis

SPECIFICATIONS
Maximum Output Power
8Ω Per Channel, Both Channels Driven: 500W
4Ω Per Channel, Both Channels Driven: 800W
8Ω, Bridge Mode: 1700W
Connectors
Inputs: 2 x XLR, 2 x 1/4'' TRS
Input Impedance
XLR / 1/4'' TRS: 20kΩ Balanced / 10kΩ Unbalanced
Outputs: 2 x Locking-Style Professional Speaker Connector, Binding Post
System
Output Circuit Type: Class-H, Complementary Linear Output
Circuit Protection: Short Circuit Current, DC Fault, AC Fuse, Limiter, Thermal Cut
Distortion: <0.03 Percent
Damping Factor: >120 @ 8Ω
Frequency Response (@ -10 dB Below Rated Output Power): 20Hz to 20kHz, +0/-0.5 dB
Frequency Response (@ -3 dB): 10Hz to 80kHz
Signal-To-Noise: >100 dB (Unweighted, 20Hz to 20kHz)
Voltage Gain @ Level Control Max: 35.6 dB
Input Sensitivity@ Level Control Max: 0.77 V / 26 dB / 1.4 V, Switchable
Controls
Front: Power Switch, Level Control
Rear: Sensitivity, Limiter, Ground/Lift, Mode Switch
Indicators
Power: White LED
Signal: Green LED
Clip: Red LED
Protection: Yellow LED
Mono Mode: Yellow LED
Bridge Mode: Yellow LED
Power Supply
USA/Canada: 120V, 60Hz
UK/Australia/Europe: 220-240V, 50/60Hz
Korea/China: 220-240V, 50/60Hz
Japan: 100V, 50/60Hz
Power Consumption @ 1/8 Rated Power: 500W
Mains Connection: Standard IEC Receptacle
Weight: 12.5 kg
Dimensions
Height: 88 mm
Width: 482 mm
Depth: 375 mm

  Manual 1

  Manual 2

Products with the "Behringer" brand have a 2-years warranty.
Products with the brand "PIP Audio" have a 2-years warranty.
Products with the brand "PIP Light" have a 2-years warranty.

Products with the brand "Turbosound" have a 2-years warranty.
Products with the brand "Topp Pro Professional Audio" have a 2-years warranty.
Products with the brand "Truss" have a 2-years warranty.

Behringer KM1700 Power Amplifier

SPECIFICATIONS
Maximum Output Power
8Ω Per Channel, Both Channels Driven: 500W
4Ω Per Channel, Both Channels Driven: 800W
8Ω, Bridge Mode: 1700W
Connectors
Inputs: 2 x XLR, 2 x 1/4'' TRS
Input Impedance
XLR / 1/4'' TRS: 20kΩ Balanced / 10kΩ Unbalanced
Outputs: 2 x Locking-Style Professional Speaker Connector, Binding Post
System
Output Circuit Type: Class-H, Complementary Linear Output
Circuit Protection: Short Circuit Current, DC Fault, AC Fuse, Limiter, Thermal Cut
Distortion: <0.03 Percent
Damping Factor: >120 @ 8Ω
Frequency Response (@ -10 dB Below Rated Output Power): 20Hz to 20kHz, +0/-0.5 dB
Frequency Response (@ -3 dB): 10Hz to 80kHz
Signal-To-Noise: >100 dB (Unweighted, 20Hz to 20kHz)
Voltage Gain @ Level Control Max: 35.6 dB
Input Sensitivity@ Level Control Max: 0.77 V / 26 dB / 1.4 V, Switchable
Controls
Front: Power Switch, Level Control
Rear: Sensitivity, Limiter, Ground/Lift, Mode Switch
Indicators
Power: White LED
Signal: Green LED
Clip: Red LED
Protection: Yellow LED
Mono Mode: Yellow LED
Bridge Mode: Yellow LED
Power Supply
USA/Canada: 120V, 60Hz
UK/Australia/Europe: 220-240V, 50/60Hz
Korea/China: 220-240V, 50/60Hz
Japan: 100V, 50/60Hz
Power Consumption @ 1/8 Rated Power: 500W
Mains Connection: Standard IEC Receptacle
Weight: 12.5 kg
Dimensions
Height: 88 mm
Width: 482 mm
Depth: 375 mm